Float glass is annealed during the process of manufacture. This insulator layer makes the glass impact resistant and sound resistant. The elaborate patterns found on figured (or 'Cathedral') rolled-plate glass are produced in a similar fashion to the rolled plate glass process except that the plate is cast between two rollers, one of which carries a pattern. Glass casting is the process in which glass objects are cast by directing molten glass into a mould where it solidifies. While the production process is similar, heating the glass to approximately 1.200 degrees Fahrenheit and then force-cooling, the cooling process in tempered glass is accelerated to create a higher surface and/or edge compression in the glass. If we stick to the definition of glass, then scientifically, it is defined as a non-crystalline amorphous solid that has the property of transparency, and is used for practical, technological and decorative purposes. Glass block was originally developed in the early 1900s to provide natural light in industrial factories. Once the small cavity between the glass panels has been filled, the resin is then cured, either using a chemical process or under the effect of ultraviolet radiation on UV beds. It’s widely used in windows or facades as it offers brilliant clarity, which allows occupants to appreciate true colours and to enjoy true-to-life views. Extra clear glass is created by reducing the amount of iron within its content which removes the green tint inherent in standard glass. AIS Windows specializes in these architectural solutions for homes, offices and commercial spaces.
Laminated glass is a type of glass which consists of two sheets of glass with a plastic interlayer separating them. This makes toughened glass much stronger than regular glass. This type of glazing has functions of thermal insulation and noise reduction.
Laminated glass is a type of security glass manufactured by sandwiching a layer of plastic such as PVB in between two sheets of glass. Annealed Glass Evacuated glazing also offers very good sound insulation in comparison with other popular types of window glazing. This type of decorative glass is available in many colors, patterns, and translucencies and is used for both exterior and interior applications. Heat-strengthened glass, or tempered glass, is glass that has been heat treated to induce surface compression, but not to the extent of causing it to "dice" on breaking in the manner of tempered glass. The high temperatures necessary for outgassing also tend to destroy the highly effective "soft" low-emissivity coatings that are often applied to one or both of the internal surfaces (i.e. Building codes in many parts of the world restrict the use of annealed glass in areas where there is a high risk of breakage and injury, for example in bathrooms, door panels, fire exits and at low heights in schools or domestic houses. Float glass replaced this process. When broken it still shatters in long pointed splinters similar to float (annealed) glass. Insulated glass consists of two or more plies of glass separated by an aluminum or other types of spacer and is filled with air or in some cases noble gases like argon to influence the element’s Ug value. Glass is one of the most important materials in usage and finds many practical applications in our daily lives and throughout the world. Since glass is a unique material with unique optical properties, it is hugely popular in the automotive and architectural industry. In order to impart colour to the glass, other raw materials such as CoO or Fe2O3 are added to the mix. Ballistic glass and laminated glass are both rated to different standards and have a different shatter pattern.. The treatment on the glass is used to diffuse light, reduce glare and obtain a translucent appearance.